Products

DESCRIPTION

Basic Info.

Model NO.	WRA-6302A+W8BV320
Structure	Fixed Ball Valve
Type	Fixed Ball Valve
Function	Relief Valve
Temperature	Normal Temperature
Standard	ISO9001
Application	Industrial Usage, Water Industrial Usage, Household Usage
Medium	Cold/Hot Water, with 50% Glycol
Rated Pressure	Pn20
Temperature of Medium	2ºC...90ºC
Transport Package	Carton with Pallet
Specification	DN20
Trademark	Winvall
Origin	China

Product Description

DescriptionWinner motorized ball valve consists of on/off type or 3-point type actuator and W8BV... series ball valve,which have compact structure,stable operation,excellent capacity of water stoppage, large water flow rate, zero dirt block and low torque. ApplicationWinner mini motorized ball valves are widely used in HVAC system, heating system, water treatment system and some industrial equipments.
Technical data:Valve bodyMedium: cold/hot water, with 50% glycol Temperature of medium: 2...90 CentigradeRated pressure: PN20 Pipe connector: internal thread Ambient temp. range: -5...+60 Centigrade ;0...90%RH Size: 1/2'', 3/4'' and 1'' Valve type: 2-way or 3-way
Material Valve body: Hpb59-1 Seal: ball: EPDM+PTFEBall: PTFE+EPDM with O-ring Stem: EPDM O-rings

Model No.	Type	Inner Dia.	Inch	Kvs(m3/h)	Pmax(KPa)	Ps(KPa)
W8BV215	2-way	12mm	1/2"	8.6	1000	1400
W8BV220		15mm	3/4"	21	1000	1400
W8BV225		20mm	1"	26	1000	1400
W8BV315	3-way	10mm	1/2"	8.6	1000	1400
W8BV320		14mm	3/4"	21	1000	1400
W8BV325		18mm	1"	22	1000	1400

ActuatorWRA-6302A AC24V, 50/60Hz on/off
Output torque: >3.5N.m Angle of rotation: 90°Protect rank: IP54 On/off time: 15SWRA-63... on/off typeBlack wire is the control wire. Power on: valve open, power off: valve close Brown wire is connected to the power wire. Blue wire is connected to the com. Only can be used as on/off type.

Model No.	Working Voltage	Actuator type	Output torque	Consumption	On/off time	Valve body
WRA-6302A	24VAC±15% 50/60Hz	on/off	>3.5N.m	7W	50Hz:15S 60Hz:12S	W8BV215 W8BV220 W8BV225 W8BV315 W8BV320 W8BV325

Installation
Insert the valve stem to the bottom of the actuator, and insert 2 pin, located in the bottom of the actuator to the valve's mounting hole. Then screw down the brass cap nut